The official site for the SpinJag family of American made tools.USA Spin Jag Tell Us Your SpinJag Story! Details here...
SpinJag Loader - Loads polymer tipped bullets in Muzzleloaders

Unique, free-spinning tool
follows rifling improving loading
for more accurate shooting

  1. Spins with the bullet easing the loading pressure minimizing damage to the bullet or sabot.
  2. Accepts many bullet shapes.
  3. Centers bullet in bore.
  4. Rear guide keeps tool aligned and helps center bullet in bore.

So what is the difference between
the Original SpinJag and the SpinJag Loader?


The Original SpinJag was designed to load AND clean so the clearance between the barrel and tool is large enough to accommodate a cleaning patch.

The SpinJag Loader has minimum clearance (no room for a patch) and is used only for loading and seating the bullet. The closer fit ensures precise loading as the bullet travels down the barrel.

Both tools use the patented free spinning design that allow the bullet and jag to spin with the rifling, easing loading pressure on the bullet.


SST bullet and the SpinJag Loader   Picture shows how the SpinJag Loader easily accepts the new, long polymer-tipped bullets.
Section removed from a Muzzleloader barrel to show the SpinJag Loader in action.   Cutaway of barrel shows how the minimum clearance keeps the SpinJag Loader straight as possible in both front and back, ensuring straight precision loading and seating of bullet.

The SpinJag Loader is available in the following calibers:
.32, .36, .40, .45, .50, .52, .54

.32, .36, .40 cal fits 8/32 threads
.45, .50, .52, .54 cal fits 10/32 threads

Note about Ballistic Coefficient (BC) bullets
.40 caliber SpinJag and SpinJag Loader will not load BC bullets.
See 40 caliber Match Hunter or 40 caliber ELR jags.



  The SpinJag Family Of Tools...


SpinJag Loader - Muzzleloader Loading Jag

SpinJag Loader

Minimum Clearance For Even More Precise, Consistent Loading And Seating Of Bullet

32, .36, .40, .45, .50, .52, and .54 calibers available

Choose the right SpinJag Loader

 


SpinJag - Muzzleloader Cleaning and Loading Tool / Jag


The Original SpinJag

Consistently Loads A Variety Of Projectiles And Also Cleans Barrel

.32, .36, .40, .45, .50, .52, .54 and .58 caliber available

Choose the right SpinJag

 


SpinJag Bullet Starter
Choose the right SpinJag Starter

SpinJag Bullet Starter

The First Step In Smoother, Easier More Precise Loading

.40, .45, .50, .52, .54 calibers available

 
Solution Graphics
SpinJag with assorted Muzzleloader Bullets
Handles most bullet shapes
North American Hunting Club Member Tested & Recommended Seal of Approval

Recommended
by NAHC

The Original SpinJag
has received the
North American
Hunting Club

Member Tested & Recommended
Seal of Approval

Assorted bullets for Muzzleloading that { The SpinJag } can load.

SpinJag works with
many bullet shapes

A sample of the many shapes the SpinJag handles: round-balls, polymer-tipped bullets and other muzzleloader projectiles with or without sabots.

SpinJag - Made in the USA.Made in
the USA





SpinJag on Facebook
SpinJag on eBay